SILVER TOUCHE©, SILVER CLUBTM,PREMIUM®,ROYAL PINETM and XCENTTM plywood is made from selected core veneer & smooth face veneer bonded with Melamine Urea Formaldehyde synthetic Adhesive (For MR grade) & Phenol Formaldehyde synthetic adhesive (For BWR grade) confirming to IS 848-2006 and hot pressed with accurate temperature & high pressure to use under severest tropical climatic conditions.
Glue line treatment is carried out by adding suitable chemicals which are toxic to wood destroying agencies like: borer, fungus & termite. Treatment of plywood is done by dipping in a hot solution of preservative chemical.
GRADE
- Boiling Water Resistance (BWR)
- Moisture Resistance (MR)
Standard Thickness (in MM)
- 2440 X 1220, 2440 X 920
- 2140 X 1220, 2140 X 920
- 1840 X 1220, 2140 X 920
Standard Thickness (In MM)
- 4,6,8/9,12,15/16,18/19
Advantages
- No delamination,blow, bleed-through ,warpage & indentation.
- Suitable for all weather conditions.
- Borer,fungus termite resistant.
Uses
- Suitable for furniture,paneling,partion,interior decoration,shelves,racks etc.
PROPERTIES
| TESTS | REQIREMENTS | OBTAINED RESULTS |
|---|---|---|
| Type of Surface of Plywood | AA/BB/AB | AA |
| Dimensions: Length : Width : Thickness a) Less than 6 mm b) 6 mm & above Squareness Edge straightness | Tolerance : +6 mm , -0 mm +3 mm , -0 mm ±10% ± 5% 0.2% 0.2% | +2 mm +1 mm ±3% ±4% 0.08% 0.05% |
| Moisture Content % Density: | 5-15%
70 gm/mm2 | 8%
80 gm/mm2 |
| Static Bending Strength: a) Minimum Average: b) Individual: (Along the grain) Static Bending Strength: a) Minimum Average: b) Individual: (Across the grain) | Grade: BWR
MOR - MOE 40 - 5000 36 - 4500 MOR - MOE 20 - 2500 18 - 2200 | Grade: BWR MOR - MOE 55 - 6500 45 - 5500 MOR - MOE 30 - 3500 25 - 3000 |
| Static Bending Strength: a) Minimum Average: b) Individual: (Along the grain) Static Bending Strength: a) Minimum Average: b) Individual: (Across the grain) | Grade: MR MOR - MOE 30 - 4000 27 - 3600 MOR MOE 15 - 2000 13 - 1800 | Grade: MR MOR - MOE 40 - 5500 35 - 4500 MOR - MOE 25 - 3000 20 - 2500 |
| Glue Adhesion Water Resistance Test BWR Grade: 8 hrs Boiling and dried for 16 hrs at a temperature of 65±2°C (3 cycle) MR Grade: 3 hrs Soaking and dried for 8 hrs at a temperature of 65±2°C (3 cycle) | Minimum Pass Standard Minimum Pass Standard | Pass Standard |
| Mycological Test After conditioning of sample for 3 weeks at 27±2°C | Minimum Pass Standard | Pass Standard |